Peugeot Kisbee - Owner's Manual > Starting the engin
For greater safety, place the vehicle on its central stand before starting the engine.
- Turn the ignition key to "O N".
- Ensure that the throttle is in the OFF position.
- Press one of the brake levers while pressing the starter button. Do not press the starter for more than 10 seconds.
- Release the starter button as soon as the engine starts.
If the engine does not start, release the starter button and the brake lever, wait a few seconds and try again.
To kick start, place the vehicle on its central stand.
- Turn the ignition key to "O N".
- Ensure that the throttle is in the OFF position.
- Grip the gra b h andle with your right hand.
- Operate the kick-start until the engine starts
Driving
Starting off
The vehicle is on its stand with the engine running.
- Squeeze the brake lever with your left hand, grip the grab handle with your right hand and push the vehicle forwards to fold up the central stand.
- Sit on the vehicle.
- Release the left brake and turn the throttle slowly with your right hand to start moving.
Accelerating and decelerating
To accelerate, turn the throttle towards (A). To slow down, turn the throttle towards (B).
See also:
Peugeot Kisbee - Owner's Manual > Advice for starting up and driving
Before using the vehicle for the first time, make sure you are familiar with all the controls and their respective uses. If you are not sure about the functions of an y of the controls, your registered dealer can answer your questions and give you any help you may require.
Peugeot Kisbee - Owner's Manual > Braking
The right lever controls the front brake and the left lever controls the rear brake. For good braking, it is very important to coordinate the following actions: Close the throttle. Operate the left and right brake levers simultaneously and slowly increase the pressure.