Husqvarna 401 Vitpilen - Owner's Manual > Switches on the right side of the handlebar
Emergency OFF switch
The emergency OFF switch 1 is fitted on the right side of the handlebar.
Possible states
Emergency OFF switch off - In this position, the ignition circuit is interrupted, a running engine stops, and a non-running engine cannot be started.
Emergency OFF switch on - This position is required for operation; the ignition circuit is closed.
Electric starter button
The electric starter button 1 is fitted on the right side of the handlebar.
Possible states
- Electric starter button in basic position
- Electric starter button pressed - In this position, the electric starter is actuated.
Ignition/steering lock
The ignition/steering lock is in front of the upper triple clamp.
Possible states
Ignition off OFF - In this position, the ignition circuit is interrupted, a running engine stops, and a non-running engine will not start. The ignition key can be removed.
Ignition on - In this position, the ignition circuit is closed and the engine can be started.
Steering locked - In this position, the ignition circuit is interrupted and the steering locked. The ignition key can be removed.
See also:
Husqvarna 401 Vitpilen - Owner's Manual > Switches on the left side of the handlebar
High beam flasher button The high beam flasher button 1 is fitted on the left side of the handlebar.
Husqvarna 401 Vitpilen - Owner's Manual > Locking the steering
Note Danger of damage The parked vehicle can roll away or fall over. Park the vehicle on a firm and level surface. Park the vehicle. Turn the handlebar all the way to the left.