Yamaha Tracer MT09TRA - Service manual > Periodic checks and adjustments
- Periodic maintenance
- Adjusting the valve clearance
- Synchronizing the throttle bodies
- Checking the rear brake pads
- Adjusting the drive chain slack
See also:
Yamaha Tracer MT09TRA - Service manual > Front brake (right side view and left side view)
Front brake hose Front wheel sensor lead Clamp Front wheel sensor protector Brake caliper (right) Front fender Brake caliper (left) Front wheel sensor Front wheel sensor housing Front wheel sensor lead holder Position the clamp by aligning it with the top edge of the protector of the front wheel sensor lead when the protector is placed at the bottom. Install the brake pipe so that it contacts the projection on the brake caliper. Install the clamp so that the bottom side of the clamp is 10-30 mm (0.39-1.18 in) from the end of the front brake pipe.
Yamaha Tracer MT09TRA - Service manual > Periodic maintenance
Introduction This chapter includes all information necessary to perform recommended checks and adjustments. If followed, these preventive maintenance procedures will ensure more reliable vehicle operation, a longer service life and reduce the need for costly overhaul work. This information applies to vehicles already in service as well as to new vehicles that are being prepared for sale. All service technicians should be familiar with this entire chapter.