Honda CBR125RW - Service manual > Engine
- Lubrication System
- Fuel System (PGM-FI)
- Cooling System
- Engine Removal/Installation
- Cylinder Head/Valves
- Cylinder/Piston
- Clutch/Gearshift Linkage
- Alternator/Starter Clutch
- Crankshaft/Balancer/Transmission
See also:
Honda CBR125RW - Service manual > Brake Fluid
Spilled fluid can damage painted, plastic or rubber parts. Place a rag over these parts whenever the system is serviced. Do not mix different types of fluid, as they are not compatible with each other. Do not allow foreign material to enter the system when filling the reservoir. When the fluid level is low, check the brake pads for wear. A low fluid level may be due to wear of the brake pads. If the brake pads are worn and caliper pistons are pushed out, this accounts for a low fluid level. If the brake pads are not worn and fluid level is low, check the entire system for leaks.
Honda CBR125RW - Service manual > Lubrication System
LUBRICATION SYSTEM DIAGRAM CAMSHAFT ROCKER ARM CRANKSHAFT COUNTERSHAFT MAINSHAFT OIL STRAINER SCREEN OIL PUMP